Special Alloys

Special Alloy Capillary Tubes for High-Performance Applications | Stainless Steel Manufacturing with Exacting Standards

  • ALL
  • Medical Industry
  • Capillary Tube
  • Special Alloys
    • Sticky

    Nitinol (NiTi) Shape Memory Alloy in Medical Applications – Stents, Guidewires & Orthodontic Wires

    2025-08-29

    What Is Nitinol? Nitinol (Nickel-Titanium alloy) is a unique shape memory alloy (SMA) with two extraordinary properties: shape memory effect (returns to original shape when heated) and superelasticity (exhibits extreme elastic deformation under load). These properties make Nitinol indispensable in minimally invasive medical applications. Nitinol Properties Property Value Composition ~50.8% Ni, ~49.2% Ti (atomic %) Density 6.45 g/cm³ Transformation Temperature (Af) -20°C to +40°C (adjustable) Superelastic Recovery Up to 8% strain (vs 0.5% for metals) Fatigue Resistance Excellent (10⁷+ cycles) Corrosion Resistance Excellent (passive oxide layer) Biocompatibility Good (nickel release controlled) Applications in Medical Applications Cardiovascular Stents Self-expanding stents: Nitinol’s superelasticity allows crimping to small diameter and self-expansion to full diameter Peripheral artery stents: Flexibility for tortuous anatomy Carotid stents: Protection against embolization Renal stents: Superelasticity for dynamic environments Guidewires & Catheters Interventional guidewires: Superelastic core for navigation through tortuous anatomy Catheter shafts: Kink resistance, torque control Steerable catheters: Shape memory for precise positioning Orthodontic Wires Archwires: Superelasticity provides constant, gentle force for tooth movement Retainers: Shape memory for long-term retention Minimally Invasive Surgical Tools Embolic protection devices: Self-expanding filters Snare devices: Shape memory for object retrieval Clip devices: Self-closing mechanisms Bone anchors: Shape memory for secure fixation Other Applications Urologic stents: Superelasticity for dynamic ureteral environment Septal occluders: Self-expanding devices for heart defect closure IVC filters: Self-expanding inferior vena cava filters Shape Memory Effect vs Superelasticity Property Shape Memory Effect Superelasticity Temperature Below Af (martensitic) Above Af (austenitic) Activation Heat Stress Recovery Thermal recovery Stress-induced recovery Medical Example Stent deployment via body heat Guidewire navigation Nitinol Manufacturing Vacuum arc melting (VAR): High-purity alloy production Forging & hot working: Break down cast structure Cold drawing: Wire and tube production Heat treatment: Set shape memory properties Laser cutting: Stent and device fabrication Electropolishing: Surface finishing, corrosion resistance Passivation: Enhance oxide layer…

    More

    Special Alloys in Medical Applications – Complete Guide to Material Selection & Applications

    2025-09-01

    Special Alloys in Medical Applications: A Complete Guide Medical device manufacturing increasingly relies on special alloys to meet the demanding requirements of modern healthcare. From orthopedic implants to cardiovascular stents, from surgical instruments to diagnostic equipment, special alloys provide the strength, corrosion resistance, biocompatibility, and fatigue performance that standard materials cannot match. Special Alloy Overview Alloy Base Key Properties Medical Applications Ti-6Al-4V (Grade 5) Titanium High strength, low modulus, biocompatible Orthopedic implants, dental implants Ti-6Al-4V ELI (Grade 23) Titanium Superior fatigue resistance Implantable devices, surgical instruments CoCrMo (F75) Cobalt Exceptional wear resistance Joint replacements, stents Nitinol (NiTi) Nickel-Titanium Shape memory, superelasticity Stents, guidewires, orthodontic wires MP35N Nickel-Cobalt High strength, corrosion resistant Guidewires, catheter components Elgiloy Cobalt-Chromium Exceptional strength, fatigue resistance Guidewires, surgical springs 17-4PH Stainless Steel High strength, corrosion resistant Surgical instruments, implants Inconel 718 Nickel Exceptional strength, high temp Surgical instrument components Material Selection Guide By Application Application Recommended Alloy Reason Hip/knee implants Ti-6Al-4V, CoCrMo Biocompatibility, wear resistance Dental implants Ti-6Al-4V ELI Osseointegration, biocompatibility Cardiovascular stents Nitinol, CoCr Superelasticity, radial strength Guidewires Nitinol, MP35N Superelasticity, kink resistance Surgical instruments 420J2, 17-4PH Hardness, corrosion resistance Spinal implants Ti-6Al-4V, CoCrMo Strength, biocompatibility Orthodontic wires Nitinol, Elgiloy Superelasticity, shape memory By Property Property Best Alloy Alternative Highest strength Elgiloy (2070 MPa) MP35N (1380 MPa) Best biocompatibility Ti-6Al-4V ELI CoCrMo Best wear resistance CoCrMo 17-4PH Best fatigue resistance Ti-6Al-4V ELI Nitinol Best corrosion resistance Ti-6Al-4V, MP35N Inconel 625 Lowest modulus Ti-6Al-4V (114 GPa) CoCrMo (230 GPa) Shape memory Nitinol — Superelasticity Nitinol MP35N Regulatory Standards for Special Alloys Alloy Standard Description Ti-6Al-4V ASTM F1472 Ti-6Al-4V for surgical implants Ti-6Al-4V ELI ASTM F136 Ti-6Al-4V ELI for surgical implants CoCrMo ASTM F75 / F799 CoCrMo for surgical implants Nitinol ASTM F2063 Nitinol for surgical implants 17-4PH ASTM A564 PH stainless steel Inconel 718 ASTM B637…

    More

    Special Alloy Capillary Tubes in Medical Applications – MP35N, Elgiloy & PH Stainless Steel

    2025-08-31

    Special Alloy Capillary Tubes for Medical Applications While stainless steel and titanium are the most common materials for medical capillary tubes, certain special alloys offer unique properties that make them essential for demanding medical applications. MP35N, Elgiloy, and precipitation-hardening (PH) stainless steels provide exceptional strength, corrosion resistance, and fatigue performance for critical medical applications. MP35N (UNS R30035) MP35N is a nickel-cobalt-chromium-molybdenum alloy with exceptional strength and corrosion resistance. Properties Property Value Composition 35% Ni, 35% Co, 20% Cr, 10% Mo Tensile Strength ≥1380 MPa (cold drawn) Yield Strength (0.2% offset) ≥1240 MPa (cold drawn) Elongation ≥10% Hardness ≥42 HRC Density 8.66 g/cm³ Medical Applications Guidewire cores: Superelasticity, kink resistance Catheter shafts: High strength, flexibility Stent components: Self-expanding stents Surgical instrument components: High-strength, corrosion-resistant parts Elgiloy (UNS R30152) Elgiloy is a cobalt-chromium-nickel alloy with exceptional strength, corrosion resistance, and fatigue performance. Properties Property Value Composition 40% Co, 20% Cr, 15% Ni, 7% Mo, 2% Ni Tensile Strength ≥2070 MPa (cold drawn) Yield Strength (0.2% offset) ≥1860 MPa (cold drawn) Elongation ≥4% Hardness ≥50 HRC Density 8.4 g/cm³ Medical Applications Guidewire cores: High strength, fatigue resistance Catheter components: High-strength shafts Surgical instrument springs: High fatigue resistance Orthodontic wires: Shape memory, superelasticity PH Stainless Steels (17-4PH, 17-7PH, 15-5PH) Precipitation-hardening (PH) stainless steels combine the corrosion resistance of stainless steel with the high strength of tool steel. 17-4PH (UNS S17400) Property Value Composition 17% Cr, 4% Ni, 4% Cu, Nb Tensile Strength ≥1310 MPa (H1150 condition) Yield Strength (0.2% offset) ≥1170 MPa (H1150 condition) Hardness ≥40 HRC Medical Applications Surgical instruments: High-strength components Orthopedic instruments: High-wear components Dental instruments: High-strength, corrosion-resistant tools Implant components: High-strength, corrosion-resistant parts Special Alloy Comparison Property MP35N Elgiloy 17-4PH 316L Tensile Strength 1380 MPa 2070 MPa 1310 MPa 485 MPa Corrosion Resistance Excellent Excellent Good Excellent Fatigue Resistance Excellent…

    More

    Inconel 718 & Inconel 625 in Medical Applications – High-Performance Nickel Alloys

    2025-08-30

    What Are Inconel Alloys? Inconel is a family of nickel-chromium superalloys known for exceptional strength, corrosion resistance, and high-temperature stability. While primarily used in aerospace and industrial applications, certain Inconel grades — particularly Inconel 718 and Inconel 625 — have found specialized applications in medical applications where extreme performance is required. Inconel 718 Chemical Composition Element Composition (%) Nickel (Ni) 50.0-55.0 Chromium (Cr) 17.0-21.0 Iron (Fe) Bal. Niobium (Nb) + Tantalum (Ta) 4.75-5.50 Molybdenum (Mo) 2.80-3.30 Titanium (Ti) 0.65-1.15 Aluminum (Al) 0.20-0.80 Mechanical Properties Property Value Tensile Strength ≥1310 MPa (aged) Yield Strength (0.2% offset) ≥1170 MPa (aged) Elongation ≥12% Hardness ≥42 HRC (aged) Density 8.19 g/cm³ Inconel 625 Chemical Composition Element Composition (%) Nickel (Ni) 58.0 min Chromium (Cr) 20.0-23.0 Molybdenum (Mo) 8.0-10.0 Niobium (Nb) + Tantalum (Ta) 3.15-4.15 Iron (Fe) ≤5.0 Mechanical Properties Property Value Tensile Strength ≥930 MPa Yield Strength (0.2% offset) ≥415 MPa Elongation ≥42% Hardness ≤100 HRB Density 8.44 g/cm³ Applications in Medical Applications Inconel 718 Applications Surgical instrument components: High-strength, wear-resistant parts Orthopedic implant components: High-load bearing components Dental implant components: High-stress components Sterilization equipment: High-temperature autoclave components Inconel 625 Applications Chemical processing equipment: Pharmaceutical manufacturing components Corrosion-resistant tubing: Specialized sensing lines High-temperature components: Surgical instrument components Inconel vs Other Implant Materials Property Inconel 718 Inconel 625 Ti-6Al-4V CoCrMo Tensile Strength 1310 MPa 930 MPa 895 MPa 800 MPa Corrosion Resistance Excellent Excellent Excellent Excellent High Temp Strength Exceptional Excellent Good Excellent Biocompatibility Good Good Excellent Excellent Density 8.19 g/cm³ 8.44 g/cm³ 4.43 g/cm³ 8.3 g/cm³ Manufacturing Processes CNC machining: Precision components (challenging due to work hardening) Heat treatment: Age hardening for Inconel 718 (720°C/8h, then 620°C/8h) Welding: GTAW/GMAW with Inconel filler Electropolishing: Surface finishing Regulatory Standards ASTM B637 — Inconel 718 ASTM B443 — Inconel 625 ISO 9001:2016 — Medical device quality management…

    More

    Cobalt-Chromium Alloys in Medical Applications – CoCrMo for Joint Replacements & Stents

    2025-08-29

    Why Cobalt-Chromium Alloys for Medical Applications? Cobalt-chromium (CoCr) alloys are the premier choice for wear-resistant medical implant applications. With exceptional hardness, superior wear resistance, and excellent corrosion resistance, CoCr alloys outperform stainless steel and titanium in applications involving sliding contact — particularly joint replacements and cardiovascular stents. Cobalt-Chromium Alloy Grades for Medical Applications CoCrMo (ASTM F75 / F799) Property Value Tensile Strength ≥650 MPa (cast), ≥800 MPa (wrought) Yield Strength (0.2% offset) ≥450 MPa (cast), ≥600 MPa (wrought) Elongation ≥8% Hardness ≥36 HRC Density 8.3 g/cm³ CoCrNiMo (ASTM F90) Property Value Tensile Strength ≥895 MPa Yield Strength (0.2% offset) ≥760 MPa Elongation ≥10% Hardness ≥36 HRC Density 8.2 g/cm³ Applications in Medical Applications Orthopedic Implants Hip replacements: Femoral heads (articulating against UHMWPE or ceramic) Knee replacements: Femoral components (articulating against polyethylene) Spinal implants: Rods, screws, connectors Dental frameworks: Partial denture frameworks, crowns, bridges Cardiovascular Devices Blood stents: Balloon-expandable and self-expanding stents (L605, MP35N) Heart valve components: Valve frames, leaflet supports Structural heart devices: TAVR/TAVI components Surgical Instruments Wear-resistant components: Hinges, locking mechanisms Cutting instruments: Surgical blades, burrs CoCr vs Other Implant Materials Property CoCrMo Ti-6Al-4V 316L Stainless Wear resistance Excellent Poor Fair Corrosion resistance Excellent Excellent Good Strength High High Medium Density 8.3 g/cm³ 4.43 g/cm³ 8.0 g/cm³ Modulus 230 GPa 114 GPa 193 GPa Biocompatibility Excellent Excellent Good Manufacturing Processes Process Applications Advantages Investment casting Complex geometry implants (knee, hip) Net-shape, minimal machining CNC machining Precision components Tight tolerances, excellent surface Laser cutting Stents, thin-walled components Micro-precision, burr-free Forging High-strength components Improved fatigue resistance Regulatory Standards ASTM F75 — Cobalt-28Chromium-6Molybdenum alloy for surgical implants ASTM F799 — Wrought cobalt-28Chromium-6Molybdenum alloy ASTM F90 — Cobalt-35Nickel-20Chromium-10Molybdenum alloy ISO 5832-4 — Metallic materials for surgical implants ISO 5832-11 — Wrought cobalt-20Chromium-15Tungsten-10Nickel alloy Request a Quote Contact us with your CoCr alloy requirements…

    More

    Titanium Alloys in Medical Applications – Ti-6Al-4V & Ti-6Al-4V ELI for Implants

    2025-08-28

    Why Titanium Alloys for Medical Implants? Titanium alloys have revolutionized the medical implant industry. With exceptional strength-to-weight ratio, superior corrosion resistance, and outstanding biocompatibility, titanium alloys — particularly Ti-6Al-4V (Grade 5) and Ti-6Al-4V ELI (Grade 23) — are the materials of choice for orthopedic implants, dental implants, and cardiovascular devices. Titanium Alloy Grades for Medical Applications Ti-6Al-4V (Grade 5) Property Value Tensile Strength ≥895 MPa Yield Strength (0.2% offset) ≥828 MPa Elongation ≥10% Modulus of Elasticity 114 GPa Density 4.43 g/cm³ Ti-6Al-4V ELI (Grade 23) ELI = Extra Low Interstitial — lower oxygen and iron content for improved fracture toughness and fatigue resistance. Property Value Tensile Strength ≥860 MPa Yield Strength (0.2% offset) ≥795 MPa Elongation ≥10% Modulus of Elasticity 110 GPa Density 4.43 g/cm³ Applications in Medical Applications Orthopedic Implants Hip replacements: Femoral stems, acetabular cups Knee replacements: Femoral components, tibial trays Spinal implants: Rods, screws, cages, connectors Fracture fixation: Plates, screws, intramedullary nails Dental Implants Implant fixtures: Endosseous implants for tooth replacement Abutments: Connection between implant and crown Implant screws: Retention screws for prostheses Cardiovascular Devices Heart valve components: Valve housings, sewing rings Pacemaker housings: Hermetic seal enclosures Stent components: Delivery system components Key Advantages of Titanium Alloys Advantage Benefit Biocompatibility Excellent tissue integration, no allergic reactions Corrosion resistance Immune to body fluids, no ion release Low modulus Closer to bone than stainless steel (reduced stress shielding) High strength-to-weight Lightweight, strong implants Osseointegration Bone grows directly onto titanium surface MRI compatibility Non-magnetic, no artifacts Regulatory Standards ASTM F136 — Ti-6Al-4V ELI for surgical implants ASTM F1472 — Ti-6Al-4V for surgical implants ISO 5832-3 — Metallic materials for surgical implants ISO 9001:2016 — Medical device quality management Request a Quote Contact us with your titanium alloy requirements — grade, form, dimensions, quantity — and receive a competitive quote within…

    More

    304/316 Stainless Steel Capillary Tubes – Complete Specification Guide for Engineers & Procurement

    2025-08-28

    Complete Guide to 304/316 Stainless Steel Capillary Tube Specifications Selecting the right 304 or 316 stainless steel capillary tube requires understanding key specifications including dimensions, tolerances, material properties, surface finishes, and applicable standards. This comprehensive guide covers everything engineers and procurement professionals need to specify capillary tubes correctly. Dimensional Specifications Outside Diameter (OD) Range Category OD Range (mm) Typical Applications Micro Capillary 0.1 – 0.5 Medical needles, microfluidics Small Capillary 0.5 – 1.5 Instrumentation, sensors Medium Capillary 1.5 – 3.0 Hydraulic, pneumatic systems Large Capillary 3.0 – 12.0 Industrial, structural applications Wall Thickness Range Category Wall Thickness (mm) Pressure Rating Ultra-Thin Wall 0.025 – 0.05 Low pressure (< 100 psi) Thin Wall 0.05 – 0.15 Medium pressure (100-500 psi) Standard Wall 0.15 – 0.30 High pressure (500-2000 psi) Thick Wall 0.30 – 1.0 Very high pressure (> 2000 psi) Dimensional Tolerances Parameter Standard Tolerance Precision Tolerance Outside Diameter ±0.05mm to ±0.10mm ±0.01mm to ±0.03mm Wall Thickness ±10% to ±15% ±8% to ±10% Roundness ≤0.05mm ≤0.01mm Straightness ≤1.0mm/m ≤0.5mm/m Surface Roughness (Ra) ≤0.8μm ≤0.2μm (electropolished) Material Properties Comparison Property 304 Stainless 316 Stainless Tensile Strength ≥515 MPa ≥515 MPa Yield Strength ≥205 MPa ≥205 MPa Elongation ≥35% ≥35% Hardness ≤92 HRB ≤95 HRB Density 8.0 g/cm³ 8.0 g/cm³ Max Service Temp 870°C 870°C Molybdenum — 2.0-3.0% Surface Finish Options Finish Ra (μm) Applications Pickled 0.8-1.5 Industrial, general purpose Bright Annealed 0.4-0.8 Instrumentation, food, medical Electropolished 0.1-0.4 Medical, pharmaceutical, semiconductor Mechanical Polished 0.2-0.5 Decorative, food processing Applicable Standards Standard Description ASTM A269/A269M Seamless and welded austenitic stainless steel tubing for general service ASTM A213/A213M Seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes EN 10216-5 Pressure equipment – Seamless steel tubes – Technical delivery conditions for stainless steel JIS G3463 Stainless steel tubes for automotive structural purposes ISO 1127 Steel, stainless…

    More

    Precision Grade 316LVM Stainless Steel for Capillary Tubes

    2025-08-27

    Capillary Tubes in Industrial Instrumentation: The Backbone of Process Control Industrial instrumentation relies on stainless steel capillary tubes for pressure, temperature, and flow sensing across virtually every industry — from power generation to water treatment, from mining to pulp & paper. 304 and 316 stainless steel are the two most widely used grades, with selection based on the operating environment and process conditions. Applications in Industrial Instrumentation Pressure Sensing Pressure transmitter impulse lines: Connect process to pressure transmitter Pressure gauge supply lines: Direct pressure indication Differential pressure sensing: Flow and level measurement via DP cells Pressure relief monitoring: Safety system pressure detection Temperature Sensing Thermowell tubes: Protect RTDs and thermocouples from process media Temperature sensor sheaths: Probe protection in harsh environments Capillary thermostats: Temperature sensing and control Flow Measurement Orifice plate tapping lines: Differential pressure flow measurement Flow transmitter impulse lines: Connect process to flow transmitter Purge lines: Maintain clear sensing lines in dirty services Level Measurement DP level sensing: Tank level measurement via differential pressure Purge level systems: Bubble tube level measurement Float gauge lines: Mechanical level sensing Material Selection for Instrumentation Application Recommended Grade Reason General instrumentation 304 Cost-effective, adequate corrosion resistance Marine/offshore instrumentation 316 Chloride resistance Chemical processing 316 Chemical compatibility High temperature (>400°C) 321/347 Stabilized grades High pressure (>1000 bar) 316/316L Superior strength Common Sizes for Instrumentation Application OD (mm) Wall (mm) Pressure sensing 6.0-12.0 0.5-1.0 Temperature sensing 3.0-8.0 0.3-0.5 Flow measurement 6.0-12.0 0.5-1.0 Level measurement 6.0-12.0 0.5-1.0 Quality Standards ASTM A269/A269M — Seamless and welded austenitic stainless steel tubing EN 10216-5 — Pressure equipment seamless steel tubes ISO 9001:2015 — Quality management ISA standards — Instrumentation standards Request a Quote Contact us with your instrumentation requirements — grade, dimensions, pressure rating, quantity — and receive a competitive quote within 24 hours.

    More

    Stainless Steel Capillary Tube for Medical Application Components

    2025-08-26

    Capillary Tubes in Semiconductor: Ultra-High Purity Requirements Semiconductor manufacturing requires the highest standards for material purity, surface quality, and cleanliness. Stainless steel capillary tubes are used in gas delivery systems, vacuum systems, and process instrumentation. 316L stainless steel is the preferred grade for semiconductor applications due to its low carbon content, superior corrosion resistance, and electropolishability. Applications in Semiconductor Manufacturing Gas Delivery Systems Specialty gas delivery: Precision gas mixing and delivery for CVD, PVD processes Carrier gas lines: High-purity gas transport Gas mixing manifolds: Multi-gas delivery systems Vacuum Systems Vacuum pumping lines: Connection to vacuum pumps Pressure sensing: Vacuum pressure measurement Leak detection: Helium leak testing lines Process Instrumentation Temperature sensing: RTD and thermocouple protection tubes Pressure sensing: Process pressure monitoring Flow measurement: Mass flow controller connections Material Requirements Parameter Requirement Material Grade 316L (low carbon, ≤0.03%) Surface Finish Electropolished, Ra ≤0.25μm (EP grade) Weldability Orbital welding with purge gas protection Cleanliness Ultra-clean, double-bag packaging Documentation EN 10204 3.1, SEMI standards compliance Semiconductor Standards SEMI F20 — General requirements for process equipment SEMI S2 — Safety guidelines for semiconductor equipment ASTM A269/A269M — Seamless and welded austenitic stainless steel tubing ISO 14644 — Cleanroom classification Common Sizes for Semiconductor Application OD (mm) Wall (mm) Gas delivery 3.0-6.0 0.3-0.5 Vacuum lines 6.0-12.0 0.5-1.0 Pressure sensing 2.0-4.0 0.25-0.5 Temperature sensing 3.0-6.0 0.3-0.5 Surface Treatment Requirements Electropolishing: Ra ≤0.25μm for ultra-high purity Passivation: Citric acid passivation Orbital welding: Purge gas protection for clean welds Ultra-clean packaging: Double-bag, cleanroom packaging Request a Quote Contact us with your semiconductor application requirements — grade, dimensions, surface finish, certification needs, quantity — and receive a competitive quote within 24 hours.

    More

    304/316 Stainless Steel Capillary Tubes in Oil & Gas Industry – Downhole & Surface Applications

    2025-08-26

    Capillary Tubes in Oil & Gas: Extreme Conditions, Maximum Reliability The oil and gas industry operates in some of the most demanding environments on earth — from deepwater wells to arctic pipelines. Stainless steel capillary tubes are essential components in downhole sensing, surface instrumentation, and chemical injection systems. 304 and 316 stainless steel grades are selected based on the specific well conditions, fluid composition, and regulatory requirements. Applications in Oil & Gas Downhole Sensing Pressure sensing: Real-time downhole pressure monitoring Temperature sensing: Wellbore temperature measurement Fraction sampling: Fluid composition analysis Pressure gauge feeding lines: Surface pressure monitoring Surface Instrumentation Wellhead monitoring: Pressure and temperature sensing Separator instrumentation: Level, pressure, temperature sensing Pipeline monitoring: Pressure and flow measurement Chemical Injection Corrosion inhibitor injection: Continuous dosing into production streams Scale inhibitor injection: Scaling prevention in pipelines Biocide injection: Microorganism control Methanol injection: Hydrate prevention Material Selection for Oil & Gas Application Recommended Grade Reason Surface instrumentation 304 Cost-effective, adequate corrosion resistance Downhole sensing (mild) 316 Chloride resistance Downhole sensing (sour) Inconel 625 / Hastelloy H2S resistance required Chemical injection 316 Chemical compatibility Oil & Gas Standards NACE MR0175 — Sulfide stress cracking resistance API 6A — Wellhead and Christmas tree equipment ASTM A269/A269M — Seamless and welded austenitic stainless steel tubing ISO 9001:2015 — Quality management Common Sizes for Oil & Gas Application OD (mm) Wall (mm) Downhole pressure sensing 6.0-12.0 0.5-1.0 Surface pressure sensing 3.0-6.0 0.3-0.5 Chemical injection 2.0-4.0 0.25-0.5 Temperature sensing 3.0-8.0 0.3-0.5 Request a Quote Contact us with your oil & gas application requirements — grade, dimensions, certification needs, quantity — and receive a competitive quote within 24 hours.

    More

    Precision Stainless Steel Micro Tubing for Capillary Tube Applications

    2025-08-25

    Capillary Tubes in Aerospace: Critical for Flight Safety Aerospace and aviation systems demand the highest reliability from every component. Stainless steel capillary tubes serve as essential components in hydraulic systems, fuel management, environmental control, and instrumentation. Both 304 and 316 stainless steel grades are used, with material selection based on operating conditions, weight requirements, and regulatory standards. Applications in Aerospace Hydraulic Systems Hydraulic pressure sensing lines: Transmit pressure signals to sensors and gauges Actuator control lines: Precision fluid delivery for flight control actuators Leak detection systems: Monitoring hydraulic fluid integrity Fuel Systems Fuel quantity sensing lines: Capacitance probe tubing Fuel temperature sensing: Thermowell tubes for temperature measurement Fuel pressure sensing: Pressure transducer lines Environmental Control Systems (ECS) Pressure sensing lines: Cabin pressure monitoring Temperature measurement: Thermocouple sheaths Air sampling: Air quality monitoring Instrumentation & Sensing Pitot-static systems: Airspeed and altitude measurement Engine monitoring: Oil pressure, fuel pressure, temperature sensing Flight data recording: Sensor signal transmission Material Selection for Aerospace Application Recommended Grade Reason Hydraulic systems 304 High strength, pressure rating Fuel systems 304 Fuel compatibility, pressure rating Engine components 321/347 High temperature stability Marine aerospace 316 Corrosion resistance Aerospace Standards AMS 5563 — Seamless stainless steel tubing AMS 5564 — Welded stainless steel tubing ASTM A269/A269M — Seamless and welded austenitic stainless steel tubing AS9100 — Aerospace quality management NADCAP — Special process accreditation Common Sizes for Aerospace Application OD (mm) Wall (mm) Hydraulic sensing 3.0-6.0 0.3-0.5 Fuel sensing 2.0-4.0 0.25-0.5 Temperature sensing 3.0-6.0 0.3-0.5 Instrumentation 1.5-3.0 0.2-0.3 Request a Quote Contact us with your aerospace application requirements — grade, dimensions, certification needs, quantity — and receive a competitive quote within 24 hours.

    More

    © 2026 Healsmed. All rights reserved.

    Online Online